Pure Natural Simple
Elegance
Analog & Power Cables
CHATHAM | SH-1
Premium Silver Hybrid Speaker Cable
The Chatham Islands is the most easterly territory of New Zealand, boasting a wonderful variety of landscape, from the volcanic peaks piercing through rolling peatland, through to towering cliffs crowned with forest and down to the vast lagoon surrounded by endless sandy beaches.
​
Similar beauty is imbued in the Chatham SH-1 Speaker Cable, where every effort was made to preserve the grandeurs of the original soundstage. With a perfect blend of very high-purity copper and silver at its core, listeners are treated to a rare fusion of mid-upper range sparkle on vocals in tandem with fine texturing of bottom range without mass diminishment.
​
With hand-polished, laser engraved solid natural walnut wood housings, coupled with high quality PE dielectric and fully filled with natural cotton, all terminated in Pure Red Copper with 24K Gold-Plated connectors, the Chatham SH-1 looks as stunning as it sounds.
​
Exquisite, Enveloping, Extraordinary – prepare to be thrilled.
​
Cable Type: Silver Hybrid Speaker Cable
Metal: 2x Silver Plated 99.9997% LC-OFC + 2x 99.9997% LC-OFC
Metal Diameter: 13 AWG
Dielectric: High Quality Polyethylene Dielectric on Main Conductors + Natural Cotton Filler
Structure: 2 x 2P Structure
Connectors: Pure Red Copper + 24K Nickel-Free Gold-Plated BFA Banana / Y-Pin Spade
Connector Housing: Solid Natural Walnut Wood (BFA) / Brass + Solid Natural Walnut Wood (Spade)
Jacket: Dark Blue / Silver Grey Braided
Outer Diameter: 15 mm
Termination: Full Range
Lengths: 1.5M (BFA), 3.0M (BFA/Spade), 5.0M (BFA)
​
​
Chatham CH-1 | Custom Install (Spool)
Dr Richard J Varey's music and hi-fi experience blog
"I reckon the alchemy has created a kiwi speaker cable worthy of an audiophile’s dream. It’s made of Copper and Silver, and it enables my system to create pure sonic Gold."
https://hifiauditions.wordpress.com/2021/06/23/review-montaudio-chatham-ch-1-loudspeaker-cable/
​
BOWEN | AH-1
Premium Silver Hybrid Analog RCA Cable
​
Named after the mighty Bowen River in New Zealand, the Bowen range of Premium Interconnect Cables delivers outstandingly smooth, yet powerful sound coupled with stunning looks.
Building upon its predecessor, the Bowen AH-1 Silver Hybrid Analogue RCA Interconnect Cables delivers further sparkle to vocals, precise spatial resolution & greater soundstage through precision Silver-Plating on all its conductors.
Wrapped in a new Metallic Brown / Silver-Grey braided jacket with Stainless Steel caps & laser-engraved, hand-polished solid Natural Walnut Wood casings, the AH-1 RCA Interconnect Cables carries the same premium look of the range. 24K Gold-Plated nickel-free Pure Red Copper connectors ensures a secure contact with minimum end-to-end signal loss.
Featuring a fully Silver-Plated, triple conductor balanced design, with full copper foil & Silver-Plated OFC braided shielding to guard the purity of the analogue signals from all outside interference, listeners will be astonished by the transparent, detailed yet expansive tonal delivery.
Sophisticated, Luminous, Boundless - prepare to be captivated.
​
Specifications
Cable Type: Silver-Plated Triple-Conductor Balanced Design Analogue RCA Interconnect Cable
Metal: Silver-Plated 99.9997% LC-OFC
Metal Diameter: 22 AWG
Dielectric: High Quality Polyethylene Dielectric on Main Conductors
Shielding: Full Copper Foil + Silver-Plated OFC Braided
Connectors: Pure Red Copper + 24K Nickel-Free Gold-Plated
Connector Housing: Stainless Steel + Solid Natural Walnut Wood
Jacket: Metallic Brown / Silver Grey Braided
Outer Diameter: 8.5 mm
Lengths: 1.0M, 1.5M, 2.0M, 3.0M
​
BOWEN | AH-1
Premium Silver Hybrid Analog XLR Cable
​
Named after the mighty Bowen River in New Zealand, the Bowen range of Premium Interconnect Cables delivers outstandingly smooth, yet powerful sound coupled with stunning looks.
Building upon its predecessor, the Bowen AH-1 Silver Hybrid Analogue XLR Interconnect Cables delivers further sparkle to vocals, precise spatial resolution & greater soundstage through precision Silver-Plating on all its conductors.
Terminated by In-house developed custom XLR connectors fabricated from 24K Gold-Plated nickel-free Pure Red Copper, internals are filled with blue PBT for lifelong mechanical stability. Spring-loaded push button locks ensure no accidental detachment, whilst the hand-polished, laser-engraved solid Natural Walnut Wood casings gives every cable its distinctive look.
Featuring a fully Silver-Plated, triple conductor balanced design, with full copper foil & Silver-Plated OFC braided shielding to guard the purity of the analogue signals from all outside interference, listeners will be astonished by the transparent, detailed yet expansive tonal delivery.
Sophisticated, Luminous, Boundless - prepare to be captivated.
​
Specifications
Cable Type: Silver-Plated Triple-Conductor Balanced Design Analogue XLR Interconnect Cable
Metal: Silver-Plated 99.9997% LC-OFC
Metal Diameter: 22 AWG
Dielectric: High Quality Polyethylene Dielectric on Main Conductors
Shielding: Full Copper Foil + Silver-Plated OFC Braided
Connectors: Pure Red Copper + 24K Nickel-Free Gold-Plated, PBT Filled
Connector Housing: Brass + Solid Natural Walnut Wood
Jacket: Metallic Brown / Silver Grey Braided
Outer Diameter: 8.5 mm
Lengths: 1.0M, 1.5M, 2.0M, 3.0M
​
BOWEN | AC-1
Analog RCA Cable
​
The Bowen River, originating near the snowy peaks of Mt. Grave in northern Fiordland, New Zealand, is fed by many small streams as it picks up speed and volume on its way south, culminating at the hanging valley as it plunges 162m into the head of the Milford Sound, forming the spectacular Lady Bowen Falls.
​
Inspired by the river’s journey, the creators of the Bowen AC-1 Analogue Interconnect Cable have recreated the same crisp, smooth frequency response reminiscent of the upper Bowen River, whilst maintaining the same spectacularly powerful delivery as the Lady Bowen Falls.
​
Featuring a triple conductor balanced design, with full copper foil & OFC braided shielding to guard the purity of the analogue signals from all outside interference, listeners will be astounded by the clean, natural, powerful tonal delivery.
​
Crisp, Natural, Powerful – prepare to be delighted.
Features
-
Stainless Steel + Natural Walnut Wood Casing
-
Pure Red Copper + 24K Gold-Plated Connectors
-
Copper Foil + OFC Braided Shielding
-
100% Expertly Hand-Terminated and Tested
​
Specifications
Cable Type: Triple-Conductors Balanced Design Analog RCA Interconnect Cable
Metal: High Purity 99.9997% LC-OFC
Metal Diameter: 22 AWG
Dielectric: High Quality Polyethylene Dielectric on Main Conductors
Shielding: Full Copper Foil + OFC Braided
Connectors: Pure Red Copper + 24K Nickel-Free Gold-Plated
Connector Housing: Stainless Steel + Solid Natural Walnut Wood
Jacket: Metallic Brown / Yellow Gold Braided
Outer Diameter: 8 mm
Lengths: 1.0M, 1.5M, 3.0M
​
BOWEN | AC-1
Analog XLR Cable
​
Named after the mighty Bowen River in New Zealand, the Bowen range of Premium Interconnect Cables delivers outstandingly smooth, yet powerful sound coupled with stunning looks.
Terminated by in-house custom developed XLR connectors fabricated from 24K Gold- Plated nickel-free Pure Red Copper, internals are filled with blue PBT for lifelong mechanical stability. Spring-loaded push button locks ensure no accidental detachment, whilst the hand-polished, laser-engraved solid Natural Walnut Wood casing gives every cable its distinctive look.
Featuring a triple conductor balanced design, with full copper foil & OFC braided shielding to guard the purity of the analogue signals from all outside interference, listeners will be astounded by the clean, natural, powerful tonal delivery.
Crisp, Natural, Powerful – prepare to be delighted.
​
Features
-
PBT Filled Brass + Natural Walnut Wood Casing
-
Pure Red Copper + 24K Nickel-Free Gold-Plated Connectors
-
Copper Foil + OFC Braided Shielding
-
100% Expertly Hand-Terminated and Tested
​
Specifications
Cable Type: Triple-Conductor Balanced Design Analogue XLR Interconnect Cable
Metal: High Purity 99.9997% LC-OFC
Metal Diameter: 22 AWG
Dielectric: High Quality Polyethylene Dielectric on Main Conductors
Shielding: Full Copper Foil + OFC Braided
Connectors: Pure Red Copper + 24K Nickel-Free Gold-Plated, PBT Filled
Connector Housing: Brass + Solid Natural Walnut Wood
Jacket: Metallic Brown / Yellow Gold Braided
Outer Diameter: 8 mm
Lengths: 1.0M, 1.5M, 2.0M, 3.0M
​
ARAPUNI | PH-1
Premium Silver Hybrid Audiophile Grade Power Cable
​
Electricity, the lifeblood which pulses through every facet of modern life, is a key player in powering all audio equipment. Often running through thin, subpar cables whilst distorted by outside interference such as Wi-Fi, Bluetooth and mobile phones, it leads to degradation in sound quality.
Named after the largest and oldest running renewable hydroelectric power station on the Waikato River in the North Island of New Zealand, the Arapuni PH-1 Power Cable features completely new designs for supreme performance. Dubbed "Ultra Silver Hybrid", it is a carefully formulated mixture of Monocrystalline Copper with Silver-Plated and Non-Plated Linear Crystal Oxygen Free Copper in different core diameters, which delivers top-end sparkle in perfect balance to the mid and low frequencies, resulting in a lifelike soundstage.
Oversized large gauge of 2 x 4.123 mm² Live and Neutral conductors combines with the massive 4.451 mm² Earth conductor to provide over five times the cross-sectional area of a typical household power cable, ensuring maximum power delivery and response for the most demanding system.
Fully shielded with end-to-end copper foil & Silver-Plated OFC braided mesh, external interference is kept to a minimum to deliver power as cleanly as it was renewably sourced from the mighty Waikato River. A beautiful dark green & silver braiding with a laser-engraved, hand-polished solid walnut ring completes the unmistakably classy Montaudio signature look.
The Arapuni PH-1 Power Cable is terminated in Gold-Plated Audiophile Grade Connectors and is available in different termination configurations to suit different countries. Rhodium-Plated Audiophile Grade Connector are available in Limited Release in selected terminations. Each cable is expertly test-and-tagged in New Zealand to the AS/NZ 3760 standard.
Specifications
Cable Type: Premium Silver Hybrid Power Cable
Metal: 99.999997% Monocrystal Copper + 99.9997% Silver-Plated & Non-Plated LC-OFC
Metal Diameter: 2 x 4.123 mm² + 1x 4.451 mm²
Dielectric: High Quality Polyethylene PE Dielectric on Main Conductors + Natural Cotton Filler
Shielding: Full Copper Foil + Silver-Plated OFC Braided
Connectors: Gold-Plated Audiophile Grade Connectors (Rhodium-Plated Limited Release in selected terminations)
Terminations: Available in US 3-Pin, AU/NZ, BS 1363, EU SCHUKO into IEC C15
Jacket: Dark Green / Silver Grey Braided
Outer Diameter: 17 mm
Lengths: 2.0M or Custom Length
Rating: 10A/250V 15A/125V A.C
ARAPUNI | PC-1
Audiophile Grade Power Cable
Electricity, the lifeblood which pulses through every facet of modern life, is a key player in powering all audio equipment. Often running through thin, sub-par cables whilst distorted by outside interference such as Wi-Fi, Bluetooth and mobile phones, its degradation leads to reduction in sound quality.
Named after the largest and oldest running renewable hydroelectric power station on the Waikato River in the North Island of New Zealand, the Arapuni PC-1 Power Cable has been specially developed to deliver thunderous power whilst blocking out interference. Large-gauge 99.9997% high-purity Linear Crystalline Oxygen Free Copper conductors (LC-OFC) provides over four times the cross-sectional area of a typical household power cable for electrical current conduction, ensuring peak power delivery at all times.
Fully shielded with end-to-end aluminum foil & OFC braided mesh, external interference is kept to a minimum to deliver power as cleanly as it was renewably sourced from the mighty Waikato River. A beautiful dark green & yellow braiding with a laser-engraved, hand-polished solid walnut ring completes the unmistakably classy Montaudio signature look.
The Arapuni PC-1 Power Cable is terminated in 24K Gold Plated Audiophile Grade Connectors and is available in different termination configurations to suit different countries. Each cable is expertly test-and-tagged in New Zealand to the AS/NZ 3760 standard.
Specifications
Cable Type: Audiophile Grade Power Cable
Metal: 99.9997% LC-OFC
Metal Diameter: 2 x 3.298 mm² + 1 x 3.463 mm²
Dielectric: High Quality Polyethylene PE Dielectric on Main Conductors + Natural Cotton Filler
Shielding: Full Aluminum Foil + OFC Braided
Connectors: Gold Plated Audiophile Grade Connectors
Terminations: Available in AU/NZ, US 3-Pin, BS 1363, EU SCHUKO into IEC C15
Jacket: Dark Green / Yellow Gold Braided
Outer Diameter: 15 mm
Lengths: 2.0M or Custom Length
Rating: 10A/250V 15A/125V A.C
Purely, Natural.
​
At montaudio, the relentless pursuit of natural beauty is always at the forefront of every design. By choosing solid natural woods, every creation is unique with its own distinctive grains, patterns and colors that are unreplicable. With every piece delicately hand-polished by craftsmen, be prepared to be aurally and visually enthralled.
Reviews & Awards
​
Dr Richard J Varey's music and hi-fi experience blog - I reckon the alchemy has created a kiwi speaker cable worthy of an audiophile’s dream. It’s made of Copper and Silver, and it enables my system to create pure sonic Gold.
https://hifiauditions.wordpress.com/2021/06/23/review-montaudio-chatham-ch-1-loudspeaker-cable/
​
Witchdoctor Magazine- Montaudio Cables REVIEW – Conducting Signals Like An Orchestra
​
Dr Richard J Varey's music and hi-fi experience blog - I’ve been listening to music with Montaudio cables
​
AudioNet - The beauty of New Zealand is now strongly felt by listening
https://www.audionet.com.tw/thread-12322-1-1.html
​
AudioArt Magazine - TW
​
Super AV Magazine - HK
​
